3402 - Patron Saint® Flame Retardant Drill Shirt, Long Sleeve

(No reviews yet) Write a Review

SPEND & SAVE

UP TO 20% OFF*

  • Orange
  • Navy
  • 3402 - Patron Saint® Flame Retardant Drill Shirt, Long Sleeve
$68.35 inc. GST

Important Information

This product has a Flame Retardant Coating that will wash out over time.
This budget friendly option is perfect for infrequent use.

For long lasting safety, please consider purchasing a product with Inherent Flame Resistant Fabric

Maximum file size is 524288, file types are bmp, gif, jpg, jpeg, jpe, jif, jfif, jfi, png, wbmp, xbm, tiff, psd, pdf, webp, ai, dst, eps, emb, svg

Frequently bought together:
Don't forget to check the size guide

Measuring Instuctions (Guide Only)

This guide explains the different terms used in garment size guides and shows you how to take your own measurements when choosing your fit.

Please Note: This is a general guide only, please refer to specific sizing instructions for your desired garment in the product descriptions section or style sheet.

If you would like to share feedback about this page, please contact us directly via the link below: Ask us about sizing

Tops

T-Shirts, Shirts, Blouses, Sweaters/Jumpers, Hoodies, Cardigans, Polos, Tunics, Crop Tops, Tank Tops/Singlets, Camisoles, Vests, Tube Tops, Bodysuits, Activewear Tops

How to Measure Half Chest (Garment Measurement) for tops

The "half chest" measurement is taken directly from the garment itself, not your body. It's a key indicator of how wide a top will be. A top's "half chest" measurement is taken when laid on a flat surface and measured arm pit to arm pit.

What you'll need:

  • A top you want to measure (e.g., a t-shirt, shirt, or jumper)
  • A measuring tape (cloth or flexible metal)
  • A flat surface (e.g., a table or clean floor)

Instructions:

  1. Lay the Garment Flat:
    • Place the top flat on a clean, hard, and even surface.
    • Smooth out any wrinkles or creases, ensuring the front and back layers are perfectly aligned and not bunched up.
  2. Locate the Armpit Seams:
    • Identify where the sleeve seam meets the main body of the top, directly under the armpit. These are your starting and ending points.
  3. Measure Across:
    • Take your measuring tape.
    • Place one end of the tape precisely at the point where the armpit seam starts on one side of the top.
    • Stretch the tape straight across the front of the top, ensuring it remains flat and horizontal.
    • Read the measurement at the point where the armpit seam starts on the opposite side.
  4. Record the Measurement:
    • This figure is your "half chest" measurement.

Half Chest Measurement Diagram

How to measure half chest (Garment Measurement)

Lowers

Trousers, Pants, Jeans, Shorts, Skirts, Leggings, Jeggings, Capris, Culottes, Track Pants, Cargo Pants, Chinos, Boardshorts, Swim Shorts.

What's a Half Waist Measurement?

Put simply, a half waist measurement is half the circumference of your waist. Instead of measuring all the way around, you're measuring from one side of the waist to the other when the garment is laid flat.

How to Take a Half Waist Measurement (Step-by-Step)

You'll take this measurement on a garment, not on a person. Here's how you do it:

What you'll need:

  • A flat surface (a table or clean floor works a treat)
  • A measuring tape (cloth or flexible metal)

Steps:

  1. Grab your Garment: Lay the garment you want to measure (trousers, skirt, shorts, etc.) flat on your clean, smooth surface.
  2. Smooth it Out: Make sure there are no wrinkles, puckers, or folds in the waistband. You want it as flat and even as possible, just like it would sit when worn.
  3. Locate the Waistband: Identify the top edge of the waistband. This is the part that would sit around your natural waist or where the garment is designed to sit on your body.
  4. Align Your Tape: Place one end of your fabric measuring tape at one side of the waistband, right at the outer edge. Make sure it's snug against the fabric but not stretching it.
  5. Measure Across: Run the measuring tape straight across the very top edge of the waistband to the opposite outer edge.
  6. Read the Measurement: Take your reading. That's your half waist measurement!

Half Waist Measurement Diagram

How to measure half waist (Garment Measurement)

Description

3402 - Patron Saint® Flame Retardant Drill Shirt, Long Sleeve

For Complete Sizing Guide, Click Here

Fabric

  • 190 gsm Cotton Drill

Details

  • Full open front with twin flap pockets.
  • Two tone front & back with Gusset Sleeves. 
  • Complies with international F/R standards: BS EN 11612:2008 Protective clothing to protect against heat and flame - Clause 6.33.
  • ARC Thermal Protection Value -  ATPV Rating: 6.8 Cal/cm2 (Calories per cubic centimeter) Comply with ASTM F1959/F1959M-12 Standard HRC: 1

Features

3402-sizing.jpg

View AllClose

Additional Information

Style:
Shirt
Safety Class:
Arc Rated
Promotion:
Spend & Save
Safety Class:
Flame Retardant
Range:
Patron Saint
View AllClose

Frequently Asked Questions

You can view all frequently asked questions here

Turnaround time?

We recommend allowing up to 10-15 business days* for the decoration and dispatch of your order. Please note that non-decorated orders are typically delivered much sooner. Deliveries to remote areas may take longer.

*In the rare case that a stock delay occurs, our team will contact you to advise a restocking ETA for your approval.

For your convenience, your order may arrive in multiple shipments if items are dispatched from separate warehouses.

For new customers utilising our decoration services (Screen Printing, Embroidery, or Heat Transfers): Your order will require artwork set-up prior to production. The time required for this set-up may vary depending on your specific artwork requirements.

If you require delivery by a specific date, please contact us prior to placing your order. contact us

Can you do urgent orders?
Yes, in a lot of cases we can facilitate urgent orders!

Please consult with our customer service team before placing your order online.

Our friendly team will assess your requirements to determine an ETA.

Start a discussion with our team by contacting us here

Can I get a proof/mock-up when I place my order?

Absolutely, for new logos, the artwork set-up service fee includes an artwork proof for email approval prior to production.

Production will only commence upon your written approval via email.

If you have any questions before placing your order, please contact us here

Can I get a multiple logos on a garment?

You sure can, here is a breakdown of our decoration options:

Embroidery

  1. You can add your first logo using the built in embroidery options on our product pages.
  2. Now you can add an additional logo here, please make sure you match the quantity of the garments you wish to apply additional logos to. Please use the comments text field on this page to include any special instructions.

Alternatively, you can chat with our team if you need assistance with your order.

Heat Transfers

  1. You can start your order for Heat Transfers here.

There are detailed instructions to help guide you with your order.

Alternatively, you can chat with our team if you need assistance with your order.

Screen Printing

Start your FREE Screen Printing Quote here

Mixed Decoration *Example: Front Embroidery and Large Back Screen Print

Our team are here to help! Start your FREE Quote here

Do you offer screen printing?

Yes, we certainly do! We're proud to offer in-house screen printing services.

If you're interested in ordering custom screen printing, please click on the following link to get started: 

Screen Printing Services

Need assistance from a team member?

We are only a few clicks away!

Ask Us a Question

5-star Service

See what our customers think!