Measuring Instuctions (Guide Only)
This guide explains the different terms used in garment size guides and shows you how to take your own measurements when choosing your fit.
Please Note: This is a general guide only, please refer to specific sizing instructions for your desired garment in the product descriptions section or style sheet.
If you would like to share feedback about this page, please contact us directly via the link below: Ask us about sizing
Tops
T-Shirts, Shirts, Blouses, Sweaters/Jumpers, Hoodies, Cardigans, Polos, Tunics, Crop Tops, Tank Tops/Singlets, Camisoles, Vests, Tube Tops, Bodysuits, Activewear Tops
How to Measure Half Chest (Garment Measurement) for tops
The "half chest" measurement is taken directly from the garment itself, not your body. It's a key indicator of how wide a top will be. A top's "half chest" measurement is taken when laid on a flat surface and measured arm pit to arm pit.
What you'll need:
- A top you want to measure (e.g., a t-shirt, shirt, or jumper)
- A measuring tape (cloth or flexible metal)
- A flat surface (e.g., a table or clean floor)
Instructions:
-
Lay the Garment Flat:
- Place the top flat on a clean, hard, and even surface.
- Smooth out any wrinkles or creases, ensuring the front and back layers are perfectly aligned and not bunched up.
-
Locate the Armpit Seams:
- Identify where the sleeve seam meets the main body of the top, directly under the armpit. These are your starting and ending points.
-
Measure Across:
- Take your measuring tape.
- Place one end of the tape precisely at the point where the armpit seam starts on one side of the top.
- Stretch the tape straight across the front of the top, ensuring it remains flat and horizontal.
- Read the measurement at the point where the armpit seam starts on the opposite side.
-
Record the Measurement:
- This figure is your "half chest" measurement.
Half Chest Measurement Diagram
Lowers
Trousers, Pants, Jeans, Shorts, Skirts, Leggings, Jeggings, Capris, Culottes, Track Pants, Cargo Pants, Chinos, Boardshorts, Swim Shorts.
What's a Half Waist Measurement?
Put simply, a half waist measurement is half the circumference of your waist. Instead of measuring all the way around, you're measuring from one side of the waist to the other when the garment is laid flat.
How to Take a Half Waist Measurement (Step-by-Step)
You'll take this measurement on a garment, not on a person. Here's how you do it:
What you'll need:
- A flat surface (a table or clean floor works a treat)
- A measuring tape (cloth or flexible metal)
Steps:
- Grab your Garment: Lay the garment you want to measure (trousers, skirt, shorts, etc.) flat on your clean, smooth surface.
- Smooth it Out: Make sure there are no wrinkles, puckers, or folds in the waistband. You want it as flat and even as possible, just like it would sit when worn.
- Locate the Waistband: Identify the top edge of the waistband. This is the part that would sit around your natural waist or where the garment is designed to sit on your body.
- Align Your Tape: Place one end of your fabric measuring tape at one side of the waistband, right at the outer edge. Make sure it's snug against the fabric but not stretching it.
- Measure Across: Run the measuring tape straight across the very top edge of the waistband to the opposite outer edge.
- Read the Measurement: Take your reading. That's your half waist measurement!
Half Waist Measurement Diagram
Description
BS909L - Ladies Remy Pants
Sizing
Fabric
- 4-Way Stretch 62% Polyester, 34% Viscose, 4% Elastane
- Machine washable, crease resistant, easy care fabric
Unique Features
- On-trend slim leg silhouette in our favorite best-selling Perfect Pant fabric.
- Choose as a singular pant or as a style compliment to your existing Perfect Pant uniform.
- Superior 4-Way Stretch fabric allows maximum comfort and minimal creasing.
- Easy Care, Machine washable with very little ironing required.
- Mid-rise, zip front with a flattering slimline waistband.
- No side pockets or belt loops creates a clean sleek appearance at waist and hips.
- 82cms average inseam length with additional 5 cms hem allowance for longer alteration.
- Deep size range: 4 - 26 makes staff fittings a breeze.
Decoration
- Recommend embroidery if required
Co-ordinates With
- Perfect Pant Range. Add our Bianca Jacket for a more formal outfit.
Fits Like
- similar sizing to our Stella Pant BS506L
- Fabric stretch and pant style features need to be taken into consideration.
- When sizing staff, as with all pant fittings, we recommend fitting samples be used prior to ordering.
Perfect For
- General Workplace Uniforms
- Hotel and Restaurant Uniforms
- Company or Brand Representatives.
- Corporate Promotions and Events
- Admin, Real Estate, Reception
- School and Educational Staff
1 Review
-
Great work pants
I have been wearing these pants every day for the last few years and the quality is amazing.